Saltlogic

• It is an automatic, electronic device that generates chlorine from salt (on-site-electrolytic-chlorination).
• The SALTLOGIC salt water chlorinator consists of a cell, where the chlorine is produced, and a power pack, which supplies power to the cell.

• It is an automatic, electronic device that generates chlorine from salt (on-site-electrolytic-chlorination).
• The SALTLOGIC salt water chlorinator consists of a cell, where the chlorine is produced, and a power pack, which supplies power to the cell.

Chlorine is generated by passing mildly salted water through the salt chlorinator cell during the normal filtration cycle and is returned to the swimming pool where it acts to purify the water.

• Salt chlorination is the healthy alternative to chlorinating your pool; the natural way.
• No further use of granular or liquid chlorine.
• No more red eyes and dry itchy skin.
• Lower maintenance and lower operating costs compared to any other chlorination method.
• Quick and easy to install.

A detailed version of SALTLOGIC salt water chlorinators warranty is available on the page Warranty

• Our electrode coatings are designed for 9,000 hours life span under normal operating conditions
• Depending on operating conditions, expect to replace the salt chlorinator cell every 3 – years

It’s easy! After installing your salt chlorinator simply:
1. • add the recommended amount of salt to your swimming pool
   • choose your desired filtration run cycles
   • choose desired chlorine output.

• SALTLOGIC salt water chlorinators are designed to operate at salt concentrations between 3 000 parts per million and up.
• A salt level of 5 000 ppm is optimum.
• Sea water, by way of comparison, is about 35 000ppm.
  For more information see 

SALT REQUIREMENTS AND CALCULATIONS

• Nothing at all. SALTLOGIC salt chlorinators are overload and short circuit proof and will not be damaged at any salt level.
• In fact, higher salt concentrations are beneficial as they increase the chlorine output and life span of the salt chlorinator cell.

• It’s easy! Simply check the status of the ‘add salt’ indicator on the SALTLOGIC chlorinator power pack and top up with salt when the indicator is illuminated.
• Your pool dealer  or pool shop will be able to test your swimming pool water and advice on precise levels if desired.

• SALTLOGIC self-cleaning Salt Chlorinators use sealed, self-cleaning cells that remain scale free during their operation, provided the pool water is maintained within industry standards.
• However good  SALTLOGIC self-cleaning Salt Chlorinators are, remember they were developed to assist you with the maintenance of your swimming pool.

1. For more information see 

REGULAR POOL MAINTENANCE CHECKS

• Inspect your SALTLOGIC non-self cleaning Salt Chlorinator Cell regularly and clean when necessary. For detailed instructions refer to the manual: 

NON-SELF CLEANING CHLORINATOR MANUAL

• No. Modern swimming pool equipment materials will not be damaged by the low levels of salt used by SALTLOGIC salt chlorinators.
• However, should your swimming pool be more than 20 years old and have visible steel piping and fittings, then these should be replaced with PVC or other suitable plastic material.